|
|
||
Intelligent Motion Systems continues to meet the needs of a growing motion industry with these powerful, high performance stepper motor drivers - the IB104, IB106 and IB1010.
Using MOSFET technology to achieve high power from a miniature package, these drives have what it takes to get the maximum performance from the larger, higher torque motors. This type of performance is required for today's most demanding applications. OEM designers will appreciate not only the enhanced capabilities in such a small package, but the LOW price as well.
These 80 volt drives have advanced features usually found only in more expensive drives - single supply, optically isolated inputs, half and full step, and a chopping rate of over 20 kHz that eliminates audible noise.
IMS has preserved pin compatibility with our smaller drives for an easy upgrade if more power is needed. In addition, their small size makes them ideal for PC board mounting, but they can also be frame or chassis mounted and will accept 0.200/0.196 center connectors or plug type terminal strips.
The IB104 operates from +24 to +80 volts at 4 amps/phase for lower power applications requiring high voltage performance.
The IB104 will run cooler because it uses the same MOSFET technology as our larger 80 volt drives.
Higher performance motors require more current. The IB106 was designed for applications requiring increased power.
The IB1010 has the same high input voltage (+80V), yet with even MORE power! A full 9 Amps per phase for an incredible 1800 watts!
The IB1010 uses the same small package as the IB106, but with an output power increase of 50%!
The IB1010 is for those applications requiring maximum power, but where size and cost are still important factors.
[back to top]
| Power Supplies | IP804 | ISP300-7 |
| AC Input Voltage | 120 or optional 240 VAC |
|
| Input Frequency | 50 - 60 Hz |
|
| No Load Output Voltage |
76 VDC @ 0 Amps | 68 VDC @ 0 Amps |
| Continuous Output Rating |
65 VDC @ 2 Amps | 63 VDC @ 2 Amps |
| Peak Output Rating |
58 VDC @ 4 Amps | 59 VDC @ 4 Amps |
| Options | 240 VAC input, side mounting clips |
|
| Type | unregulated linear |
unregulated switching |
High Performance Miniature Bipolar
Stepping Motor Drivers
|
 |
||||
|
|
IMS EUROPEAN SALES MGT. 4 Quai Des Etroits 69005 Lyon, France Phone: +33 / 4 7256 5113 Fax: +33 / 4 7838 1537 E-mail: bmartinez@imshome.com. Sanderson Centre 15 Lees Lane Gosport,Hampshire, UK PO12 3UL Phone: +44 / 0 2392 520775 Fax: +44 / 0 2392 502559 E-mail: mcheckley@imshome.com |
|||