Mating Connector Interface Options for:

P/N:  MAM4MRQ34** – MDrive Hybrid 34 AC Step • Torque • Speed

MDrive Hybrid 34 AC Step • Torque • Speed- p/n MAM4MRQ34**  has 3 port / connectors — P1: I/O and encoder, P2: Communication and P3: Power.

Options for mating to these ports/connectors (with part numbers for ordering) are shown here. Options include Communication Converters, Prototype Development Cables, and Mating Connector Kits depending on connector.

P1:  I/O and encoder

This port utilizes a 19-pin M23 circular connector shown below.

Connector mating options

Prototype Development Cable
MD-CS100-000 or MD-CS101-000 (right angle):

Description:  Pre-wired mating connector interfaces to the 19-pin M23 circular connector, with flying leads other end, for quick test/development.

Function:  I/O and Encoder Interface

Mating Connector Recommendations:

IMS cable MD-CS100-000 or MD-CS101-000 recommended with: MDrive's 19-pin M23 circular connector/port.

A Mating Connector Kit with 19-pin M23 mating connectors for use in building your own cables
is not offered. Shop for comparable mating connectors only:

      Vendors:

P2:  Communication

This port utilizes a 5-pin M12 circular connector shown below.

Connector mating options

Communications Converter
MD-CC401-001:

Function:  Communications Interface

Description:  Mates to an MDrive's 5-pin M12 (female) circular connector and PC's USB port, with in-line USB to RS-422/485 converter, for programming and control.



Mating Connector Recommendations:

IMS cable MD-CC401-001 recommended with: MDrive's 5-pin M12 circular connector/port and in-line RS-422 to USB converter.

A Mating Connector Kit with 5-pin M12 mating connectors for use in building your own cables
is not offered. Shop for comparable mating connectors only:

      Vendors:

P3:  Power

This port utilizes a 3-pin Euro AC circular connector shown below.

Connector mating options

Prototype Development Cable
MD-CS200-000:

Description:  Mates to the 3-pin Euro AC circular connector and AC Power.
Use of the MD-CS200-000 meets UL conditions of acceptability.

Function:  AC Line

Mating Connector Recommendations:

IMS cable MD-CS200-000 recommended with: 3-pin Euro AC circular port / connector.

If building your own cable, a Lumberg mating connector is required to meet UL conditions of acceptability.

Vendor:  Lumberg