|
|
|
The IM483H Plus is a high performance, low-cost microstepping driver utilizing advanced hybrid technology to greatly reduce size without sacrificing features. The IM483H Plus is exceptionally small, easy to interface and use, and yet powerful enough to handle the most demanding applications.
Features include:
- Low cost
- +12 to +48 VDC input voltage
- 3A RMS (4A Peak) output current
- 16 microstep resolutions
- Short circuit and over temperature protection
- Up to 51,200 steps per revolution
- Automatic current reduction
- Pin and footprint compatible with the IM805H Plus
|
|
|
- Specifications
- Ordering Information
- Options
- Downloads/Support
- General
- I/O
- Motion
- Mechanical
| Input voltage |
Includes motor back EMF |
+12 to +48 VDC |
| Output current |
RMS per phase (holding current may be lower) |
0.4 to 3 Amps |
| Peak per phase (holding current may be lower) |
0.5 to 4 Amps |
| Protection |
|
Thermal, phase to phase, +V to phase |
| Thermal (non-condensing humidity) |
Storage |
-40 to +125° C |
| Rear mounting surface (max) |
+ 85° C |
| Step frequency (max) |
|
2.5 MHz |
| Microstep Resolution |
Number of Microstep Resolutions |
16 |
| Steps per Revolution |
200, 400, 800, 1000, 1600, 2000, 3200, 5000, 6400, 10000, 12800, 25000, 25600,
36000, 50000, 51200 |
|
| |
> Open Datasheet Print View |
Ordering Information
|
|
Description |
Part Number |
| Microstepping Driver |
XIM483H |
| Developer's kit (includes: driver, interface board and heat sink/fan/clip assembly) |
XIM483H-DK1/IM805H-DK1 |
|
Options |
|
Description |
Part Number |
| Stepper motors |
NEMA 12 size
NEMA 23 size |
| Isolating thermal pad (included with driver) — included in HFC-22 |
TI-22 |
| Heat sink/fan/clip assembly |
HFC-22 |
| Driver interface board |
INT-483H/INT-805H |
| 23 pin receptacles with throwaway carrier |
PR-22 |
| Small pry bar (used to remove the throwaway carrier or the driver from the pin receptacles) |
PB-22 |
| Mounting L-bracket |
MB-22 |
|
|
|
|
