IM805 Microstepping Brushless Step Motor Driver

> For more information
 
> Product datasheet

The IM805 is a high performance, low cost microstepping driver that incorporates advanced surface munt and ASIC technology. The IM805 is small, easy to interface and use, yet powerfull enough to handle the most demanding applications.

Features include:

  • Low cost
  • +24 to +75 VDC input voltage
  • 5A RMS (7A Peak) output current
  • 14 microstep resolutions
  • Optically isolated logic inputs: step, direction, enable and reset
  • Short circuit and under/over voltage protection
  • Resistor selectable run and hold current
  • Automatic current reduction
  • Pin and footprint compatible with the IM483
IM805 Microstepping Brushless Step Motor Driver
  • Specifications
  • Ordering Information
  • Options
  • Downloads/Support
 
 
  • General
  • I/O
  • Motion
  • Mechanical
Input voltage Includes motor back EMF +24 to +75 VDC
Output current RMS per phase (holding current may be lower) 0.7 to 5 Amps
Peak per phase (holding current may be lower) 1.0 to 7 Amps
Protection   Short circuit and under/over foltage
Indicator LEDs   Fault (red) and power (green)
Thermal (non-condensing humidity) Ambient 0 to + 50° C
Storage -40 to +125° C
Max. plate temperature (heat sinking may be required) + 70° C
Isolated Inputs   Step, direction, enable and reset
Input voltage isolated inputs 0 to +5 VDC
Step frequency (max) Standard 1.80 MHz
-HS option 1.8 MHz
Microstep Resolution Number of Microstep Resolutions 14
Steps per Revolution 400, 800, 1000, 1600, 2000, 3200, 5000, 6400, 10000, 12800, 25000, 25600, 50000, 51200
mechanical dimensions
 
IM805
 

 

 

Description
Part Number
Microstepping Driver IM805
High speed inputs IIM805-HS
Heat sink H-4x
Non-isolating thermal pad TN-48
8 position 0.045 square pin P2 (motor and power), 8 position 0.025 square pin P1 (logic) IM805-8P2
34 position 0.025 square pin P1 (logic and microstep resolution) IM805-34P1
Plug type terminal strip connectors for P1 and P2 IM805-PLG
Mating connectors for the -PLG option PLG-R1/-R2
Side mounting clip set U3-CLP