The SPI Motor Interface automatically detects the IMS product listed to the right and installs the proper GUI from which configuration and run parameters may be set, including:

  - IMS Analog Speed Control GUI
  - IMS SPI Motor Interface GUI

Version 1.2.3
File Size: 4.0 MB

Intended for use with MDrivePlus and MForce Motion Control products only.

IMS Terminal is an integrated ASCII Terminal/Text editor which simplifies programming for products listed to the right by providing a text editor and terminal in one interface. 

Version 4.2.0
(Change Summary)
Release Date: December 19, 2006
File Size: 3.9 MB

IMS Terminal is an integrated ASCII Terminal/Text editor which simplifies programming for all products listed to the right by providing a text editor and terminal in one interface. 

Version 4.1.48
File Size: 3.9 MB

IMS SPI Motor Interface Change Summary
Version 3.1.29 to 3.1.37

• Added separate volts/current selectors for A1 and A2 in MDO34Plus.
• Added Fullscale, Center, DB and InputFilter for A2.
• For cases of changing data sector, added test for comm after writing.
• Added tool tip for motor warning temp label.
• Fixed "Factory" setting of analog data.
• Added new read/write commands for motor settings of MForce products.
• When Upgrading, added reading ofSN and PWM settings that saves to an INI file. [PWM settings are now stored in Data Sectors when changing MDrive/MForce device or closing SPI interface. Previously these were in the WarmBoot Sector and not saved.]
• Made number of MForce drive saves "infinite".
• Made No Save return to True after SET.
• Removed Auto-Connect feature. Connection now made by selecting port manually.

IMS Terminal Change Summary
Version 4.1.91 to 4.2.0

• Added capacity for multiple function key groups.
• Changed preferences configuraltion file to open sample programs on startup.
• Added Function Key group menu to lower-left of terminal window.
• Added timer function (^t1 == on, ^t0 == off) to Function Key abilities.
• Changed copyright dates.
• Fixed Upgrader to handle old pre-release versions of bootloader (versions: 900.000 to < 903.000)
• Set MDrive as default Device.
• Set .txt as default file type when capturing comm.
• Fixed write to edit window when aborting download.
• Fixed unhandled file error when aborting download of program.
• Added Tutorial Browser Window.
• Made Multi-Function Key Groups(10) Standard.
• Changed all references to LYNX to uLynx.
• Fixed Uploading/Downloading for all conditions of combinations of Data Types
• Changed the name for the Upload/Download temp file from LYNX.~_~ to IMSTERM.~_~
• Changed default ScrollBack buffer length to 2000
• Changed initial program file name to program1.mxt
• Changed ToolTip for Connected/Disconnected to "PC Comm Port Connected(Open)/Disconnected(Closed)"
• Added Filename of active window to Download/Upload/EditWindow.
• Clear History count to zero when "Remember File History" cleared.
• Change ^d, in Function Key macros, to ^d + number >>> delay in mSec: range = blank, 0 to 32767 mSec
• Fixed problem of file length creeping up in size with each save.
• Move *.mxt to first in list of file extensions.