'***** Electronic Gearing *****
PG 1
LB k4
  PR "Electonic Gearing"
  Rc=50 'set run current to 50%
  S7=33,0 'Sets clock type to step input
  S8=33,0 'Sets clock type to direction input
  Fm=3 'set filter motion to 1.67 Mhz cutoff freq.
  Ms=16 'Set microstep resolution to 16
  Cm=1 'Clock mode enable
  Cr=1.0 'Set clock mode ratio to 1:1
 E
 PG